Produkter Close

    Omnisense Co2 Sensor

    Vår S-19 CO2 Sensor er godt egnet til kontinuerlig sanntidslogging av CO2 nivåer i bygninger.

    Som alle våre sensorer blir data sendt via gateway til internet. Dette kan leses av i sanntid via en enhet med nettleser.

    CO2 er en god indikator på feks. hvor godt en bygnings ventilasjonssystem fungerer. Sensoren er selvkalibrerende.

    • Range 0-2000 PPM with resolution down to 1 PPM
    • Accuracy – At 72°F (22°C) when compared against a certified factory reference ± 40 ppm + 3% of reading
    • Temperature Dependence – 0.2% FS per °C
    • Stability – < 2% of FS over life of sensor (15 year typical)
    • Non Linearity – < 1% of FS
    • Pressure Dependence – 0.135 of reading per mm Hg
    • Calibration Interval – Calibration not required
    • Response Time – < 2 minutes for 90% step change typical
    • Warm up time – < 2 minutes (operational), 10 minutes (maximum accuracy)
    • Operating conditions – 32°F to 122°F (0°C to 50°C), 0 to 95% RH, non condensing
    • Over The Air updates of
      • Firmware
      • Configuration, including sample period (ie time between samples)
    • Powered from AC adapter, 100-240 VAC in, 3.3 VDC out
    • data can be graphed against data from any other OmniSense sensor or sensor(s)
    • alarm emails when measured  CO2 value exceeds high or low thresholds or returns to normal range.
    • FCC/CE approved
    • Automatic Background Logic, or ABC Logic, is a patented self-calibration technique that is designed to be used in applications where concentrations will drop to outside ambient conditions (approximately 400 ppm) at least 3 times in a 14 day period, typically during unoccupied periods.
    • Compact and wireless makes for an easy installation.

    Comes with:

    • AC Adapter


    • OmniSense Gateway
    • OmniSense Monitoring Account
    Varenummer: Omnisensor CO2
    kr 7 009,70 ekskl. mva.
    i h